Stability of aspartame in the soft drinks: Identification of the novel phototransformation products and their toxicity evaluation.

Photolytic transformation of aspartame - a widely used artificial sweetener - under the simulated sunlight was studied for the first time. The experiments were conducted in pH range of 2.5 - 7.0 and in eight soft drinks available in the market. The highest degradation rate in the tested buffered solutions was observed under the neutral pH conditions. Irradiation of the soft drinks resulted in significantly (up to tenfold) faster degradation of aspartame, regardless of its initial concentration in the beverage. Such considerable acceleration of decomposition, not reported for aspartame so far, was ascribed to influence of the co-occurring ingredients, which can act as the photosensitizers. These findings indicate that some formulations may be particularly unfavorable in the context of aspartame photostability. Qualitative analysis of the studied processes revealed formation of six phototransformation products including three previously not described. In silico estimation of toxicity showed that some of the identified photoproducts, including the novel phenolic derivatives, may be more harmful than the parent compound. Taking into account relatively extensive formation of those products in the soft drinks, such finding may be particularly important from the food safety point of view.

Millennial drinks: acidity, fluoride content, and enamel softening.

This in vitro study aimed to evaluate the acidity and fluoride content of beverages commonly consumed by millennials and the enamel-softening effect of these drinks on tooth enamel. The study included 13 beverages in 4 categories: energy (sports) drink, flavored sparkling water, kombucha, and other (an unsweetened iced tea, a vegetable-fruit juice blend, and a soft drink). The acidity was measured with a pH/ion meter, and the fluoride concentration was measured with a combined fluoride electrode coupled to the meter (n = 10 measurements per beverage). The Vickers hardness number of extracted molars was measured before and after a 30-minute immersion in 4 representative beverages via 2 immersion protocols (n = 10 per beverage per protocol): (1) immersion in the beverage only and (2) immersion alternating between the beverage and artificial saliva every other minute. The pH and fluoride concentrations of the beverages ranged from 2.652 to 4.242 and from 0.0033 to 0.6045 ppm, respectively. One-way analysis of variance (ANOVA) revealed that all differences between beverages in pH values were statistically significant, as were the majority of differences in fluoride concentrations (P < 0.001). The beverages and the 2 immersion methods significantly affected enamel softening (2-way ANOVA, P = 0.0001 to 0.033). The representative energy drink (pH 2.990; 0.0102 ppm fluoride) caused the greatest enamel softening followed by the representative kombucha (pH 2.820; 0.2036 ppm fluoride). The representative flavored sparkling water (pH 4.066; 0.0098 ppm fluoride) caused significantly less enamel softening than the energy drink and kombucha. A root beer (pH 4.185; 0.6045 ppm fluoride) had the least enamel softening effect. All tested beverages were acidic and had a pH below 4.5; only some contained fluoride. Flavored sparkling water, likely due to its higher pH, caused less enamel softening than the tested energy drink and kombucha. The fluoride content of kombucha and root beer lower their enamel-softening effects. It is imperative that consumers be aware of the erosive potential of beverages they consume.

Risk assessment of bisphenol related compounds in canned convenience foods, olives, olive oil, and canned soft drinks in Turkey.

The presence of Bisphenol A (BPA), Bisphenol A Diglycidyl Ether (BADGE), and their derivatives in seventy-nine samples of food products available in Turkish stores was determined using ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Among Bisphenol A and its analogues, BPA was the most detected migrant with 56.97%. Fish products had the highest level of BPA with 0.102 mg/kg although only three fish samples exceeded the Specific Migration Limit (SML) for BPA of 0.05 mg/kg of food. The BPF, BPS, and BPB in all analyzed foods ranged between 0-0.021, 0-0.036, and 0.072 mg/kg, respectively. BADGE derivates, BADGE·2H2O and cyclo-di-BADGE (CdB) were present in 57 and 52 samples with concentrations ranging between 0-0.354, and 0-1.056 mg/kg, respectively. All the analyzed traditional Turkish ready-to-eat meals and fish products were contaminated with BADGE·2H2O and CdB. The overall levels of BADGE and the derivates were below the specific migration limit. CdB was found at higher concentrations in traditional Turkish ready-to-eat meals, up to 1.056 mg/kg. The CdB concentration in most of the samples was above the highest figure with 0.05 mg/kg authorized by the German Federal Institute for Risk Assessment. The predominant chlorinated derivative was BADGE·H2O·HCl which was found in thirty-seven samples in the range of 0.007-0.061 mg/kg.

Interim Evaluation of Germany's Sugar Reduction Strategy for Soft Drinks: Commitments versus Actual Trends in Sugar Content and Sugar Sales from Soft Drinks.

INTRODUCTION: A high intake of sugar, in particular from sugar-sweetened soft drinks, increases the risk for obesity, type 2 diabetes mellitus, and dental caries. Germany has pursued a national strategy for sugar reduction in soft drinks based on voluntary commitments by industry since 2015, but its effects are unclear. METHODS: We use aggregated annual sales data from Euromonitor International to assess trends in mean sales-weighted sugar content of soft drinks and per capita sugar sales from soft drinks in Germany from 2015 to 2021. We compare these trends to the reduction path set by Germany's national sugar reduction strategy and to data for the United Kingdom, which adopted a soft drinks tax in 2017 and which we selected as best practice comparison country based on pre-defined criteria. RESULTS: Between 2015 and 2021, the mean sales-weighted sugar content of soft drinks sold in Germany decreased by 2% from 5.3 to 5.2 g/100 mL, falling short of an interim 9% reduction target and a 29% reduction observed in the United Kingdom over the same period. Sugar sales from soft drinks in Germany decreased from 22.4 to 21.6 g/capita/day (-4%) between 2015 and 2021 but remain high from a public health perspective. CONCLUSIONS: Reductions observed under Germany's sugar reduction strategy fall short of stated targets and trends observed internationally under best practice conditions. Additional policy measures may be needed to support sugar reduction in soft drinks in Germany.

A fully integrated 3D printed platform for sulfite determination in beverages via gas diffusion membrane extraction and digital video treatment.

In this study, we have described a miniaturized, simple, and low-cost device for sulfite determination in beverages by coupling Gas Diffusion Microextraction to paper-based analytical devices. The color change of an acid-base indicator - promoted by the generated gaseous SO2 - impregnated onto the paper surface was monitored in the function of time by video recording using a smartphone. The analytical information was related to the Hue, Saturation, Value (HSV) color space extracted from the video file. The complete analytical platform was built using a 3D printer, allowing the easy fabrication of a low-cost tailored device. Under optimized conditions, a linear relation from 5 to 90 mg L-1 was obtained using 30 µL of the reagent, 1 mL of sample, and 10 min of analysis. The relative standard deviation and the limit of detection were 2.2 % and 1.6 mg L-1, respectively. The method was successfully employed in several beverages, such as juices, soda, and coconut water.

Improvement of methods for analysing sucrose acetate isobutyrate (SAIB) in soft drinks using GC-FID and evaluating antioxidant effects in the SAIB emulsion system.

Sucrose acetate isobutyrate SAIB (E444) is a mixture produced by the esterification of sucrose with acetic anhydride and isobutyric anhydride. It is a food additive that is used as an emulsifier in soft drinks. It is difficult to analyse SAIB quantitatively because there are 256 synthesisable structures in the mixture. This study developed an analytical method for SAIB using gas chromatography-flame ionization detection (GC-FID). The pre-treatment of SAIB in soft drinks was performed using a liquid-liquid extraction method, which demonstrated a recovery rate of 107.8 ± 7.2%. In the GC-FID analysis of SAIB, numerous peaks were observed in the chromatogram, and the content of SAIB was calculated as the sum of these peak areas. A series of analytical methods were validated according to International Conference for Harmonization (ICH) guidelines. Accordingly, the applicability of the developed analytical method was confirmed for both domestic and imported soft drinks distributed in Korea. Additionally, in the linoleic acid emulsion, SAIB exhibited better lipid oxidation stability than the natural antioxidant α-tocopherol and had similar efficacy to the synthetic antioxidant butylated hydroxytoluene (BHT). Although SAIB has excellent lipid oxidation stability, it must be used within legal standards according to consumer demand to reduce the use of synthetic materials in processed foods. The validated GC-FID analytical method will enable subsequent monitoring of the distributed products.

Facile and Selective Determination of Total Phthalic Acid Esters Level in Soft Drinks by Molecular Fluorescence Based on Petroleum Ether Microextraction and Selective Derivation by H2SO4.

Determining the level of phthalic acid esters (PAEs) in packaged carbonated beverages is a current need to ensure food safety. High-selectivity and -accuracy identification of individual PAEs can be achieved by chromatographic and mass spectrometric (MS) techniques. However, these methods are slow; involve complicated, expensive instruments in professional laboratories; and consume a large amount of organic solvents. As such, a food analysis method is needed to conveniently and rapidly evaluate multiple contaminants on site. In this study, with the assistance of ultrasound, we quickly determined the total PAEs in soft drinks using 1.5 mL of petroleum ether in one step. Then, we determined the characteristic molecular fluorescence spectrum of all PAEs in samples (excitation (Ex)/emission (Em) at 218/351 nm) using selectively concentrated sulfuric acid derivatization. The relative standard deviations of the fluorescent intensities of mixed solutions with five different PAEs were lower than 7.1% at three concentration levels. The limit of detection of the proposed method is 0.10 µmol L-1, which matches that of some of the chromatographic methods, but the proposed method uses less organic solvent and cheaper instruments. These microextraction devices and the fluorescence spectrometer are portable and provide an instant result, which shows promise for the evaluation of the total level of PAEs in beverages on site. The proposed method successfully detected the total level of PAEs in 38 kinds of soft drink samples from local supermarkets, indicating its potential for applications in the packaged beverage industry.

Reminder-preference test, affective difference-preference test using reference framing with a brand: 1. Sensitivity comparisons with the same-different difference-preference test.

Attempts to reduce the sugar content of carbonated drinks are ongoing. Reducing the sugar content while maintaining the sensory quality requires the development of an effective sensory test method that can measure a consumers' perceived sensory difference and preference of reformulated products against the reference product. The A-Not A with reminder (A-Not AR) method (sometimes called the reminder method) allows blind sensory tests of multiple test samples vs. a reference, while for the reference, marketing information, such as brand name and advertisements emphasizing the consumer benefit, can be provided to improve the marketing effects and consumer expectation. Thus, a preference test method can also simulate branded tests using A-Not AR design with a branded reference, making them suitable for consumer sensory tests. In the present study, an affective difference-preference test method using an A-Not AR design with the reference familiarization procedure of providing marketing information was developed, called the "reminder-preference test". The "reminder-preference test" sensitivity was compared with the previously suggested version of the "same-different difference-preference test", using signal detection d' analyses. A lemon-lime flavored carbonated drink was used as the reference and compared with two types of reformulations. The consumers were divided randomly into two groups that performed one of the two difference-preference test methods. With the "reminder-preference test", the consumers watched a commercial advertisement for the reference by providing its brand name before the tests to evoke the marketing effects. The proposed sensory test of the "reminder-preference test" was more sensitive than the "same-different difference-preference test", in terms of both sensory and preference discriminations. Hence, brand effects can be incorporated into the consumer sensory evaluation to achieve the reformulation objective and the potential of the "reminder-preference test" and its signal detection d' analyses to improve the effectiveness and efficiency of consumer sensory measurements.

Co-precipitation based on layered double hydroxides and anionic surfactants for preconcentration of six benzoylurea insecticides in soft drinks before simultaneous analysis by high-performance liquid chromatography.

Layered-double hydroxides (LDHs) modified with anionic surfactants via a co-precipitation method were developed for preconcentrating and simultaneous analysis of six benzoylurea insecticides (BUs) by high-performance liquid chromatography (HPLC). The anionic surfactants with different chain lengths, including sodium dodecylbenzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), sodium 1-nonane sulfonate (SNS), and sodium 1-hexane sulfonate monohydrate (SHS) were investigated to improve the extraction efficiency of LDHs. The SDBS-LDHs provided the highest efficiency for the enrichment of the BUs studied. Under the chosen conditions, enrichment factors in the range of 38-69 and detection limits in the range of 0.1-0.3 µg L-1 were achieved. Good reproducibilities (RSD < 13.8%) and recoveries (71.4-118.7%) were also obtained. The proposed preconcentration method, used as an in situ procedure offers rapid and simple simultaneous preparation of LDHs and extraction of BUs. The method was successfully applied for residue analysis of BUs in fruit- and flower-derived soft drink samples.

Fully integrated sampler and dilutor in an electrochemical paper-based device for glucose sensing.

An electroanalytical platform capable to take and dilute the sample has been designed in order to fully integrate the different steps of the analytical process in only one device. The concept is based on the addition of glass-fiber pads for sampling and diluting to an electrochemical cell combining a paper-based working electrode with low-cost connector headers as counter and reference electrodes. In order to demonstrate the feasibility of this all-in-one platform for biosensing applications, an enzymatic sensor for glucose determination (requiring a potential as low as -0.1 V vs. gold-plated wire by using ferrocyanide as mediator) was developed. Real food samples, such as cola beverages and orange juice, have been analyzed with the bioelectroanalytical lab-on-paper platform. As a proof-of-concept, and trying to go further in the integration of steps, sucrose was successfully detected by depositing invertase in the sampling strip. This enzyme hydrolyzes sucrose into fructose and glucose, which was determined using the enzymatic biosensor. This approach opens the pathway for the development of devices applying the lab-on-paper concept, saving costs and time, and making possible to perform decentralized analysis with high accuracy.

Rapid Determination of Sunset Yellow in Soft Drinks Using Silicon Nanoparticles Synthesized under Mild Conditions.

Sunset yellow (SY) is a synthetic colorant which can cause allergies, diarrhea and other symptoms in sensitive people. When ingested too much, it can accumulate in the body and cause damage to the kidneys and liver. Therefore, the content of SY in food must be strictly controlled. In order to regulate their use and ensure food quality, simple and cost-effective methods need to be developed to identify them. In this experiment, fluorescent silicon nanoparticles (SiNPs) were prepared by a one-step method, which is simple, mild and less time-consuming. The fluorescent SiNPs prepared had good thermal stability, excellent salt resistance and pH stability. SY effectively quenched the fluorescence of SiNPs by fluorescence resonance energy transfer when added to the system as an interfering substance. The method had a good linear relationship in the range of SY concentration of 0.050 - 14.0 µg mL-1 and the detection limit is 0.023 µg mL-1. The established sensor was applied to the detection of SY in beverages, and the recovery rate was 93.8 - 102.4%. Based on the excellent selectivity and sensitivity of the method, it could provide a convenient way for the detection of SY in food samples.

Caffeine Consumption in a Group of Adolescents from South East Poland-A Cross Sectional Study.

Caffeine is the most common psychoactive substance available to adults, as well as to children and adolescents. The safety of its use in younger age groups requires further research. The aim of this study was to evaluate caffeine intake, to identify products and drinks that are the main sources of caffeine intake in the diet of the subjects and the risk of excessive caffeine intake with the diet of adolescents, stratified by gender. A cross-sectional study was conducted among 508 adolescents aged 16-18 years from southern Poland. Black tea, cola-based soft drinks and milk chocolate were the most frequently consumed products containing caffeine in the diet of the examined persons. The average caffeine intake was 95.54 mg/day (1.54 mg/kg b.w.). In 12.2% of the subjects the dose of 3 mg/kg b.w./day was exceeded, and in over 41.3% the dose causing sleep disorders was exceeded. The dose causing anxiety was also exceeded in 18.1% of the respondents, significantly more often in girls than boys (p = 0.0487).

Worldwide survey of pesticide residues in citrus-flavored soft drinks.

After more than ten years since pesticide residues were detected in citrus-flavored soft drinks, this study reveals that the situation has not changed. A new sensitive multiresidue UHPLC-MS/MS method has been validated for 88 pesticides, which was used to analyze 200 samples manufactured in 67 countries, 80% corresponding to fruit-based soft drinks. The results show that 98% of the samples collected worldwide contained at least one pesticide, and 85% of them contained more than 4 pesticides. 40 out of 88 target compounds were quantified among the screened samples. Europe was the world region with the highest total amount of pesticides, probably due to the higher content of juice concentrate in samples, which may be the main source of the pesticide residues. Nevertheless, residues were also found in samples with no juice, so water quality also plays an important role as the main ingredient of citrus-flavored soft drinks.

WinMLR program for the determination of sorbic and benzoic acids in food samples.

The program WinMLR has been developed to quantify sorbic and benzoic acids in soft drinks, fruit juices, and soy sauce by making a multilinear regression treatment of experimental data to a linear combination of standard signals. The spectra of sorbic and benzoic acid and samples were obtained from a conventional spectrophotometer, which has been saved in an ASCII file to be applied with the WinMLR program. Before to determine sorbic and benzoic acids in samples, the wavelength validation and calibration parameters were studied. Standard solutions of sorbic and benzoic acids were used for the calibration parameters to measure the individual analyte. If the sample has simultaneously both compounds, it is better to choose the synthetic mixture for the calibration parameters. This technique provides a good recovery in the range of 80.4-104.8% without a complicated and expensive instrument.

Health risk assessment of endocrine disruptor bisphenol A leaching from plastic bottles of milk and soft drinks.

Bisphenol A (BPA) is of major concern to public health due to its toxic potential and xenoestrogenic endocrine-disrupting effect. One of the major sources of BPA comes from the plastic bottles used to pack milk and soft drinks. The purpose of the present study was to assess and compare the risk associated with BPA transfer from plastic bottles to milk and soft drinks being stored in summer and winter conditions. A sensitive and reliable method of solid phase extraction cartridge packed with multi-walled carbon nanotubes (MWCNTs) was employed. In milk samples (supplied in plastic bottles) of winter season, BPA levels were 0.17-0.32 mg/ kg. In milk samples of summer season, BPA levels were 0.77-1.59 mg/ kg. In soft drink samples of winter, BPA levels were between 0.14 and 0.3 mg/kg. While in 4-month-aged summer soft drink samples, BPA levels were 0.7-1.02 mg/kg of food. The daily exposure dose (DED) of BPA in milk samples of winter season was 1.42-2.67 µg/kg which was below the standard tolerable daily intake (TDI) of 50 µg of BPA/kg of body weight as per USEPA. The DED of BPA in milk samples of summer season was 5.58-10 µg/kg of body weight which was also less than TDI. For soft drink samples, BPA from winter samples was ranged from 1.17 to 1.67 µg/kg of body weight while for summer 4-month-aged samples was 2.5-7.08 µg/kg of body weight. Both types of samples were still less than TDI of BPA.

A comparison of PMT-based and CCD-based sensors for electrochemiluminescence detection of sunset yellow in soft drinks.

The use of artificial colorants in food is highly regulated due to their potential to harm human health. Thus, it is crucial to detect these substances effectively to ensure conformance with industrial standards. In this work, we prepared a photomultiplier tube (PMT)-based electrochemiluminescence (ECL) sensor and a charged coupled device (CCD)-based ECL sensor and compared their merits in the detection of sunset yellow (SY) dye. The sensors used C,N quantum dot-embedded g-C3N4 nanosheets (QDs@NSs) as the ECL agent and K2S2O8 as the coreactant. SY was analyzed on the basis of amplification in the QDs@NHs-K2S2O8 ECL system. The PMT-based sensor realized ultrasensitive detection using a single electrode, especially at low concentrations of SY. A CCD-based sensor imaged the ECL phenomenon of an electrode array and provided the advantages of high throughput and time savings. Under optimized conditions, both sensors exhibited high specificity, reproducibility and stability; detection limits of 20 nM with PMT detection and 5 µM with CCD detection were determined for SY, with detection ranging over at least two decades. The practical feasibilities of these systems were confirmed by satisfactory detection of SY in real drink samples.

All solid-state miniaturized potentiometric sensors for flunitrazepam determination in beverages.

Flunitrazepam is one of the frequently used hypnotic drugs to incapacitate victims for sexual assault. Appropriate diagnostic tools should be available to victims regarding the growing concern about "date-rape drugs" and their adverse impact on society. Miniaturized screen-printed potentiometric sensors offer crucial point-of-care devices that alleviate this serious problem. In this study, all solid-state screen-printed potentiometric flunitrazepam sensors have been designed. The paper device was printed with silver and carbon ink. Formation of an aqueous layer in the interface between carbon-conducting material and ion-sensing membrane nevertheless poses low reproducibility in the solid-contact electrodes. Accordingly, poly(3,4-ethylenedioxythiophene) (PEDT) nano-dispersion was applied as a conducting hydrophobic polymer on the electrode surface to curb water accumulation. Conditioning of ion-sensing membrane in the vicinity of reference membrane has been considered carefully using special protocol. Electrochemical characteristics of the proposed PEDT-based sensor were calculated and compared favorably to PEDT-free one. The miniaturized device was successfully used for the determination of flunitrazepam in carbonated soft drinks, energy drink, and malt beverage. Statistical comparison between the proposed sensor and official method revealed no significant difference. Nevertheless, the proposed sensor provides simple and user-friendly diagnostic tool with less equipment for on-site determination of flunitrazepam.

Ethanol as a Probe for the Mechanism of Bubble Nucleation in the Diet Coke and Mentos Experiment.

The Diet Coke and Mentos experiment involves dropping Mentos candies into carbonated beverages to produce a fountain. This simple experiment has enjoyed popularity with science teachers and the general public. Studies of the physicochemical processes involved in the generation of the fountain have been largely informed by the physics of bubble nucleation. Herein, we probe the effect of ethanol addition on the Diet Coke and Mentos experiment to explore the impact that beverage surface tension and viscosity have on the heights of fountains achieved. Our results indicate that current descriptions of the effects of surface tension and viscosity are not completely understood. We also extend and apply a previously reported, simplified version of Brunauer-Emmett-Teller theory to investigate kinetic and mechanistic aspects of bubble nucleation on the surface of Mentos candies in carbonated beverages. A combination of this new theory and experiment allows for the estimation that the nucleation sites on the Mentos candy that catalyze degassing are 1-3 µm in size, and that between 50,000 and 300,000 of these sites actively nucleate bubbles on a single Mentos candy. While the methods employed are not highly sophisticated, they have potential to stimulate fresh investigations and insights into bubble nucleation in carbonated beverages.

Extraction of phthalic acid esters from soft drinks and infusions by dispersive liquid-liquid microextraction based on the solidification of the floating organic drop using a menthol-based natural deep eutectic solvent.

In this work, a natural deep eutectic solvent (NADES) consisting of L-menthol and acetic acid in a 1:1 molar ratio has been applied as extraction solvent for the dispersive liquid-liquid microextraction based on the solidification of the floating organic drop (DLLME-SFO) of a group of nine phthalic acid esters (dipropyl phthalate, DPP; butyl benzyl phthalate, BBP; dibutyl phthalate, DBP; dicyclohexyl phthalate, DCHP; diisopentyl phthalate, DIPP; di-n-pentyl phthalate, DNPP; di(2-ethylhexyl) phthalate, DEHP; diisononyl phthalate, DINP; and diisodecyl phthalate, DIDP) from three common infusions (camomile, pennyroyal mint, and linden teas) and three soft drinks (green tea, tonic, and lime and lemon drink), using dihexyl phthalate (DHP) and di-n-octyl phthalate (DNOP) as internal standards. After the DLLME-SFO procedure, analyses were carried out by high-performance liquid chromatography with UV detection. Method calibration showed good linearity for all the analytes and matrices, with determination coefficients (R2) higher than 0.9910. Relative recovery values were between 71 and 125 %, with relative standard deviation values in the range 1-22 % for the six types of samples, while the limits of quantification of the method were in the range 4.3-51.1 µg/L for infusions and in the range 3.5-33.3 µg/L for soft drinks. Several samples purchased in different local supermarkets were analysed, finding DPP, DBP, DIPP, DEHP and DINP, although only DPP, DBP and DEHP could be quantified in some of them.

In Vivo and In Vitro Assays Evaluating the Biological Activity of Taurine, Glucose and Energetic Beverages.

Taurine is one of the main ingredients used in energy drinks which are highly consumed in adolescents for their sugary taste and stimulating effect. With energy drinks becoming a worldwide phenomenon, the biological effects of these beverages must be evaluated in order to fully comprehend the potential impact of these products on the health due to the fact nutrition is closely related to science since the population consumes food to prevent certain diseases. Therefore, the aim of this study was to evaluate the biological effects of taurine, glucose, classic Red Bull® and sugar-free Red Bull® in order to check the food safety and the nutraceutical potential of these compounds, characterising different endpoints: (i) Toxicology, antitoxicology, genotoxicology and life expectancy assays were performed in the Drosophila melanogaster model organism; (ii) The in vitro chemopreventive activity of testing compounds was determined by assessing their cytotoxicity, the proapoptotic DNA-damage capability to induce internucleosomal fragmentation, the strand breaks activity and the modulator role on the methylation status of genomic repetitive sequences of HL-60 promyelocytic cells. Whereas none tested compounds showed toxic or genotoxic effect, all tested compounds exerted antitoxic and antigenotoxic activity in Drosophila. Glucose, classic Red Bull® and sugar-free Red Bull® were cytotoxic in HL-60 cell line. Classic Red Bull® induced DNA internucleosomal fragmentation although none of them exhibited DNA damage on human leukaemia cells. In conclusion, the tested compounds are safe on Drosophila melanogaster and classic Red Bull® could overall possess nutraceutical potential in the in vivo and in vitro model used in this study. Besides, taurine could holistically be one of the bioactive compounds responsible for the biological activity of classic Red Bull®.